Home > SHOP BY VEHICLE > DODGE > VIPER > DRIVETRAIN & MISC. >

Viper Mopar Performance Engine Controller - P5155254AB
Viper Mopar Performance Engine Controller - P5155254AB


 
List Price: $1,400.00
Our Price: $1,365.00
Savings: $35.00



Mopar Part Number: P5155254AB
Qty:

Description
 
Designed for race only applications, the Stage I Engine Controller has modified spark and fuel tables which function when "power adders" like headers, cat-back exhaust, aftermarket cams and cold air intake systems are used. The computer senses the additional air flow and will compensate with appropriate fuel and spark to maximize performance.
Features:

  • Power adders can be used without turning on dash warning lights. Catalysts and O2 sensors can be removed without tripping warning lights or causing limp mode to activate
  • Chassis dyno results showed a slight HP gain (approx 10 hp) on a stock ACR but the intent of this controller is to work with power adders to maximize performance
  • The revised fuel / spark tables are intended for power levels below 700 hp. This controller is not intended for use with nitrous, superchargers, or packages that go above 700 hp. It might work depending on your setup, but it wasn't designed to function in that range
  • The 1-4 skip shift feature in the production calibration has been eliminated
  • Requires the use of 93 octane fuel only
  • The rev limit has been increased from 6400 rpm to 6500 rpm
  • Tachometer settings have been adjusted for updates every 25 RPM (vs. every 100 RPM)
  • Increases engine idle speed from 700 rpm to 750 rpm
  • The ETC pedal / throttle MAP has been refined which improves pedal feel
  • Tested using rear axle ratios between 3.07:1 to 4.10:1

  • Engine Control Module
  • Stage 1
  • Fits 2008 - 2010 Model Years

Share your knowledge of this product. Be the first to write a review »
Mopar Online Performance sells only sells genuine Mopar Performance parts and products.